Your position: Home / Programmer Tools / Microtronik
PDF Format
  • Description


    Autohex II HW4 and full functions available in BMW from ISN read write to key programming and BMW Ecu programming and coding (HexTag is included)

    Using this kit you can do following:
    Read old ISN in BMW E series for following Ecus:D62M57A0,  D62M57B0,  D60PSA0,  D50M57A0,  D50M57E1,  D60M47A0,  D60M57A0,  MEV9N46L,  ME9N45,  ME9N62,  ME9E65_6,  N73_L0,  N73_R0,  ME9N62_2,  MSV70,  MS450DS0,  N62_TUE,  N62_TUE2.
    Read Long ISN (SK) in BMW E series from following Ecus:  MSV80,  MSD80,  MSD81,  MSD85,  MSD85Y,  MSS60,  MEVD176K,  ME17N45,  MED17_2,  MED17_2N,  MEV17_2,  MEV17N46,  MEVD174K, MEVD174KW,  MV1722,  MVD1722,  MEVD172,  MEVD1724,  MEVD1725,  MEVD172Y,  MEVD17KW,  D70N47A0,  D70N47B0,  D71N47A0,  D71N47B0,  D71N47C0,  D71N47D0,  D72N47A0,  D72N47B0,  D73N47A0,  D73N57A0,  D73N57B0,  D73N57C0,  D73N57D0
    Read Long ISN (SK) in BMW F series from following Ecus: MEVD172Y,  MEVD172,  MEVD1724,  MEVD1725,  N63TU_L0,  N63TU_R0,  S63TU_L0,  S63TU_R0
    Read/Write long ISN (SK) in BMW E and F series on Bench using Factory Mode. No need to open the DME/DDE (Only Autohex II can do this function)
    ISN Reading from Tricore Ecus by boot mode.
    Indivedual Programming for any Ecu in BMW E and F series
    Ecu Swapping if hardware is matched.
    CAS1, CAS2, CAS3 and CAS3+ read and write ISN and SK
    Key Programming For E and F series (CAS1, CAS2, CAS3, CAS3+, CAS4 ,CAS4+, FEM, BDC)
    BMW E series EGS ISN matching with CAS
    BMW F series EGS 6HP and 8HP EWS Resetting
    BMW E Series, F Series and G Series coding for all Ecus (calculation of Ecucoding is calculated from FA)
    BMW advanced coding (manual coding)
    Vehicle order modification and backup and restore from LM,FRM,...ETC
    Do diagnose and service functions from Autohex II (Read and erase fault codes, data stream values, activations, reset adaptation,...)
    Use BMW ISTA-D on Autohex II WVCI (BMW ISTA-D Driver)
    Unlock secrity of BDC and FEM to able to: Change BDC and FEM VIN, Change BDC and FEM ISN, Mileage Reset for BDC and FEM, and making a key for BDC and FEM.
    Read and write ISN of MSD85, MSD87, MSV90 in F series.
    Ecu Cloning/Tuning for a wide range of brands. This function is free for 90 days.
    Read and write CAS 1,2,3,4 EEPROM and FLASH 100% safely using HexTag tool.
    Read and write other modules from BMW,Mercedes, Audi, and others BDM protocol by HexTag tool
    Modify KOMBI Mileage by HexTag tool
    Renew all BMW keys, and many other brands by HexTag tool.


    What you get:
    Autohex II Hardware WVCI HW 4
    The powerful HexTag BDM and Key programmer
    BMW Software Standard License
    ISN Boot Mode License
    BMW Ecu Programming License
    BMW Key Programming License
    BMW ISTA/D driver to run dealer software
    1 year technical support
    1 year hardware warranty
    1 year online access to online programming

Autohex II BMW Full Package

BMW Technicians who are looking for a tool that can do everything possible in BMW cars.
WXY3436
Sold:
4
USD
$4,850.00
    Please select the information you wantX
+
-
(7 available)
Shipping Cost:
to
Estimated Delivery Time:
Please select the country you want to ship from